There comes a time when you need to have a good paint job done in your home or workplace. But there is a lot more to it than just getting paint and smearing on your walls. To get the best out of your painting projects, you will need to ensure you have a couple of things wrapped up first. This article aims to discuss with you some of the best interior painting techniques that you may be interested in. Some of these cleaning tips can also help to cut your cleanup and paint time in half.
1. Roll to the full height of the wall to avoid any lap marks
You might also want to keep a wet edge to ensure you avoid any lap marks from being visible after your work. Lap marks are the ugly stripes that form on your wall after painting. They usually occur when you roll over paint that is already partly dry. To avoid this, you need to maintain a wet edge on your roller paints.
2. Mix several cans of paint to ensure you have a consistent color throughout your room
You find that most paint color usually varies slightly when you keep mixing them the moment you use the whole of your last can. If you need to open a new can when halfway through your paint job, you find that there is always a slight difference. You can avoid this by mixing larger cans of paint so as to have a consistent color.
3. To have a perfect edge, let the paint dry before cutting the tape loose
Don’t pull the tape from the trip the moment the paint is dry. Wait for at least 24 hours before doing so. This will ensure you have a more perfect edge in your work. Pull the tape at a 45° angle.
4. Start painting the trim before going to the walls and ceilings
There is a certain order that professional painters usually follow when painting a room. They start by painting the trim, then go to the ceiling before they finish with the walls. This process is a lot easier and makes work simpler.
5. Prime and texture the wall patches to avoid having a blotchy finish
All freshly painted walls always look blotchy most of the time. Most of the time, the sheen isn’t always consistent even if the color is uniform. To avoid this, you should prime and also texture any wall patches on your wall before starting to paint.
6. Clean any dirty surfaces on your wall to ensure the paint sticks
For the paint to form a strong bond with your wall, ensure you clean any dirty or oily surfaces on your wall. These types of environments can make the paint easily peel off.
7. Roll the paint along the edges to have a consistent fixture
Areas next to trim and corners that are only always painted with a brush usually have this noticeable feeling and touch from the textures of the surrounding paint. To avoid this, roll the paint immediately to ensure a better-finished texture.
8. Use cotton drop cloths instead of plastic
Regardless of how you are with your paint job, spills and splatters will always happen. So, instead of wiping them from your carpet afterward, just prepare for them by placing some canvas drop clothes around your place of work.
9. Wherever you can’t maintain a wet edge, feather out the paint
Areas like large ceilings or extra-tall walls are difficult to have single and continuous paint strokes. Here, the best way of ensuring you minimize on the lap parks is by feathering out the paint at the edges where you can’t keep it wet.
10. Sand trim between the coats to have a smoother finish
You may end up with a grainy type of texture if you don’t sand the surface between the coats. Before applying any coat of paint, sand the trim for an ultra-smooth finish of your work.